How to fix the led strip light?

How to fix the led strip light?

1: Check the length of the installation, and then take the integer interception. Because RGB led strip is 3 LEDs to a unit, you can see the cut-off icon on the mainboard. If arbitrarily cut, will cause a unit does not to work. For example, if you need 7.5 meters of length, the strip should be cut 8.2 meters. The plug itself is a diode, and with the DC drive, so there are positive and negative. If positive and negative reversed, it is in an insulated state, the strip light does not work. If the connecting plug does not light up when energized, you only need to disconnect the other end of the strip.

2: The placement of the strip is packaged in a tray, the newly unpacked strip will be distorted, not easy to install, you can sort out the flat firstly, in the light slot can be placed. As the light is single-sided light, it will appear uneven light and dark if not placed flat, especially at the corners. So we need to pay attention to it.

Welcome to www.ledsix.com
LED Factory Direct

LEDSIX support:
1. Online Purchase
2. Drop Shipping
3. Wholesale
4. Customized

BUSINESS INQUIRIES EMAIL: info@ledsix.com
Contact us anytime!

Welcome to subscribe to our YouTube channel.
https://www.youtube.com/channel/UCYdbPTTEo7SEiwwF87gSb2g